Single-Time Alarm - Seiko Cal. 5T82 Instructions Manual

SINGLE-TIME ALARM

l The alarm can be set to ring only once at a designated time within the coming 12 hours.
l The alarm time can be set in one minute increments.
ALARM TIME SETTING
I Before using the alarm, check that the ALARM hands are adjusted to the current time. (See
"SETTING THE TIME AND ADJUSTING ALARM AND WORLD TIME HANDS.")
B
ALARM
hour hand
ALARM
minute hand
20
CROWN Pull out to first click.
t
Press repeatedly to set the
B
desired alarm time.
* The ALARM hands move quickly
if button B is kept pressed.
t
Push back in to normal
CROWN
position.
* The alarm is automatically
engaged.
1. The single-time alarm cannot be set for a time more than 12 hours ahead of the current time.
While you keep button B pressed to advance the ALARM hands quickly, they stop when they
indicate the current time and the alarm is disengaged. In that case, release button B, and then,
press and hold the button again to set the ALARM hands to the desired time.
2. While the crown is at the normal position, the ALARM hands indicate the current time when the
alarm is disengaged and the designated alarm time when it is engaged.
l HOW TO STOP THE ALARM
At the designated time the alarm rings for 20 seconds, and it is automatically disengaged
as it stops. To stop it manually, press button A or B.
1. While the WORLD TIME hour and minute hands are moving quickly, the alarm rings differently
than usual. However, this is not a malfunction.
2. While the alarm is ringing, pressing button A or B will only stop the alarm, and no world time
operation can be made.
21