Tripp Lite SmartOnline AG-0358 Series Owner's Manual page 17

Operations
5
Select your Power Strategy
Next, the UPS will prompt you to pick the desired POWER
STRATEGY.
Using the UP / DOWN
STRATEGY preference and press the APPLY
See the Power Strategy Selection Options and UPS
Operating Modes sections under the Operations section for
operating characteristics of each power strategy.
6
Select your Password
Next, the UPS will prompt you to pick the desired PASSWORD.
Using the UP / DOWN
desired password and press the NEXT
the second digit. Repeat for digits 2 through 4.
Note: To quickly set the password to "0 0 0 0" press the NEXT button
4 times.
7 Select UPS Output Voltage
Next, the UPS will prompt you to select the desired OUTPUT
VOLTAGE.
Using the UP / DOWN
voltage, then select APPLY
buttons, select your POWER
button.
buttons, select the first digit of your
button to advance to
buttons, select the UPS output
.
Power Strategy
Auto-Adaptive
Max Efficiency
Max Quality
Freq. Regulation
Freq. Conv. To 60Hz
Freq. Conv. To 50Hz
Back Select Apply
ESC
5
Password Setup
0
Back Select Next
ESC
6
Output Voltage
200 Vac
208 Vac
220 Vac
230 Vac
240 Vac
Back Select Apply
ESC
7
17
SETUP
0 0 0
SETUP
SETUP