Removing And Cleaning The Guide Rails; Replacing The Oven Lamp - Asko OCS8664A1 Instructions For Use Manual

MAINTENANCE

Removing and cleaning the guide rails

Use conventional cleaning products to clean the guide rails.
1. Remove the screw using a screwdriver.
2. Remove the guide rails from the holes in the back wall.

Replacing the oven lamp

The lamp in this household appliance is only suitable for illumination of this
appliance. The lamp is not suitable for household room illumination.
The lamp is a consumer item and therefore not covered by warranty. Replace the
defective lamp with a lamp of the same type.
Disconnect the appliance from the power supply by removing the plug from the
socket or by switching off the circuit breaker in the fuse box.
Please note: the light bulb can be very hot! To prevent burns, use protection to
remove the light bulb.
3. Remove the four screws from the cover panel. Remove the cover panel, the glass and the
sealing ring.
4. Remove the faulty halogen lamp and replace it with a new one.
5. Replace the cover panel, the glass and the sealing ring.
Attention: The sealing ring needs to fit perfectly in the oven wall recess.
EN 29