Cleaning The Water Tank Filter; Descaling - Asko OCSM8487 Series Instructions For Use Manual

CLEANING

Cleaning the water tank filter

Descaling

If the water tank filter is dirty, you can clean it under the tap.
1. Remove the suction tube with the filter.
2. Clean it out under the tap and put it back into position. Ensure that
the filter touches the base of the water tank
During the steam process, there can be an accumulation of mineral
deposit in the steam system. This needs to be removed from time
to time. You need to carry out this task when the 'Appliance needs
descaling' notification is shown.
If the appliance is not descaled after three notifications, the steam
functions will no longer be available. Use this function only when the
oven has cooled down fully. The descaling process comprises descaling
and rinsing. Notifications with information and requests for actions will be
shown on the display during the process.
1. Pour water mixed with descaling agent into the water reservoir.
Consult the descaling agent instructions for the correct mixing ratio.
2. Open the 'Settings' menu
3. Select 'Cooking settings'
4. Select 'Steamer settings'
5. Select 'Descaling' to select the function.
6. Touch the confirm key to start descaling.
Note
We advise using NOKALK for descaling. NOKALK is an extremely
efficient descaling agent based purely on natural, entirely
biodegradable ingredients. The solution is non-corrosive, not
aggressive and is environmentally-friendly.
EN 39