Gaggenau AW 25 Instructions For Installation And Use Manual page 14

Cleaning and maintenance
en
Removing metal grease filter
1 Open the glass front slowly and fully. Hold the glass
front in the centre when doing so, gripping it firmly.
2 Open the lock and swing down the metal grease
filter. When you do this, take hold of the metal
grease filter from underneath with your other hand.
3 Take the metal grease filter out of the holder.
Notes
–
Fat may accumulate in the bottom of the metal
grease filter.
–
Hold the metal grease filter level to prevent
grease from dripping out.
Cleaning the metal mesh grease
filters
These instructions apply to several appliance variants. It
is possible that individual features are described which
do not apply to your appliance.
m
Warning – Risk of fire!
Fatty deposits in the grease filter may catch fire.
Regularly clean the grease filter. Never operate the
appliance without a grease filter.
Notes
– Do not use aggressive, acidic or alkaline cleaning
products.
– We recommend cleaning the grease filters every 2
months.
– When cleaning the metal grease filters, also clean
the metal grease filter holder in the appliance using
a damp cloth.
– The metal grease filters can be cleaned in the
dishwasher or by hand.
14
By hand:
Note: You can use a special degreaser to remove
stubborn dirt. This can be ordered from the online shop.
▯
Soak the metal grease filters in hot soapy water.
▯
Clean the filters with a brush and then rinse them
thoroughly.
▯
Leave the metal grease filters to drain on an
absorbent material.
In the dishwasher:
Note: Slight discolouration may occur if the metal
grease filters are cleaned in the dishwasher. This
discolouration has no effect on the performance of the
metal grease filters.
▯
Use normal domestic dishwashing detergents.
▯
Do not clean heavily soiled metal grease filters
together with cookware.
▯
Place the metal grease filters in the dishwasher,
leaving plenty of space around them. Do not trap
the metal grease filters.
▯
Select a temperature of no more than 50 °C.
Installing the metal mesh grease filter
m
Warning – Risk of injury!
Components inside the appliance may have sharp
edges. Wear protective gloves.
Note: Clean all accessible parts of the housing.
1 Insert the metal grease filter and lock it in place.
When you do this, take hold of the metal grease
filter from underneath with your other hand.
Note: Make sure that the metal grease filter is
positioned correctly.
2 If the metal grease filter has not been inserted
correctly, open the lock and reinsert the metal
grease filter correctly.