Taiwan Commate Computer Inc. 370SMA User Manual page 20

Select a DMA channel if parallel port is set as ECP or ECP+EPP.
3.5.19 PWRON After PWR-Fail
Off: When power returns after an AC power failure, the system's power is off. You must press the
Power button to power-on the system.
On: When power returns after an AC power failure, the system will automatically power-on.
Former-Sts: When power returns after an AC power failure, the system will return to the state where you left
off before power failure occurs. If the system's power is off when AC power failure occurs, it will
remain off when power returns. If the system's power is on when AC power failure occurs, the
system will power-on when power returns.
3.5.20 Game Port Address
This field sets the address of the onboard game port connector.
3.5.21 Midi Port Address
This field is used to select the midi port's address. If you have selected the midi port's address,
you may select its IRQ in the " Midi Port IRQ ".
3.5.22 Midi Port IRQ
This field is used to select the midi port's IRQ.
3.6 Power Management Setup
Power management decreases power usage under the pre-defined standby time range.
3.6.1 ACPI Function
This item allows you to enable or disable the function of Advanced Configuration and Power
Interface which offers improved power management .
Figure 3-6. Power Management Setup Screen
CMOS Setup Utility - Copyright ( C ) 1984 - 1999 Award Software
Power Management Setup
( Scroll down to see more items , as shown here )