Slide Show; Rotating Images - Microtek Take-it MV500 User Manual

Slide Show

The Slide Show function enables you to view your all
stored files by playing them back in sequence (if you
have stored more than one file). You can set the delay
to either two or five seconds (2s or 5s) between files.
To run a slide show:
1. In Playback mode, press the MENU button.
2. Use the / button to select
" " – Slide Show.
3. Press the button to display
the available options.
4. Use the / button to select a
delay option you require, then
press the OK button.
All the files stored in the memory will be displayed, one
after the other, after the OK button is pressed.
To stop the slide show, press any button on the DV
camera at any time. The displayed playback file will
remain on the LCD screen.

Rotating Images

The Rotation function enables you to rotate captured
images by 90°, 180°, and 270° when you play it
back later for viewing. This function works only on
captured still images.
To rotate an image:
1. In Playback mode, select a captured still image you
2. Press the MENU button.
ERASE
SLIDE SHOW CANCEL
ROTATION 3. Use the / button to select
2 SEC
PRINT 5 SEC
STARTUP IMAGE
4. Press the
SLIDE SHOW SELECT OK
5. Use the / button to select a
want to rotate.
" " – Rotation.
button to display
the available options.
rotation option you require,
then press the OK button.
The rotated image is displayed
on the screen, with a file-save
confirmation screen after the OK
button is pressed. Select OK,
then press the OK button to save it.
ERASE
SLIDE SHOW
ROTATION CANCEL
PRINT
90
STARTUP IMA
180
270
ROTATION SELECT OK
SAVE IT?
OK CANCEL
43