Turning The Dv Camera On/Off; Setting The Date And Time - Microtek Take-it MV500 User Manual

Turning the DV Camera On/Off

Press the POWER button to
turn the DV camera on.
When the DV camera is
turned on, the green Mode
indicators start blinking and
will stay on steady in the
Video mode, and the LCD
screen is activated as well.
Press the POWER button again to turn off both the DV
camera and the LCD screen.
DV Camera Auto Power Off
In order to prolong battery life, the DV camera or the
LCD screen may be set to turn off automatically after a
period of inactivity. If auto power saving is not
required, you can disable the auto power saving
function in the Setup menu mode (refer to page 49).

Setting the Date and Time

Set the date and time on your DV camera before you
POWER button
use the DV camera for the first time. The DV camera
Video indicator
can also add the time and date to your picture.
To set the date:
1. Press the MENU button.
2. Press
3. Use the / button to select " "
4. Use the / button to toggle
5. Use the / button to enter a new value for the
6. Press the OK button to confirm your changes and to
7. Press the MENU button to exit the menu.
to select the Setup ( )
menu option at the top.
When selected, the settings are
shown on the LCD screen and
display the current state of the DV
camera.
– Date, then press the
A Date adjustment screen appears
on the screen, allowing you to set
the date.
through the "YYYY", "MM", and
"DD" formats.
The selected option is highlighted with color.
selected option.
return to the Setup menu screen.
BEEP ON
2005/06/14
03:12:15
DATESTAMP ON
NTSC
DATE SELECT
D A T E
button.
YYYY / MM / DD
2005 / 06 / 14
SELECT SET
21