Page 1
The procedure how to format your SD card with MV500 1. Make sure your MV500 is powered off, and then open SD cover of Take-it MV500 as below illustration 2. Insert and push SD Card (1Giga Byte) into the compartment until you hear a “click” sound, and make sure SD card is secured in the compartment well, after that, close SD cover of MV500.
Page 2
SD card, and the message in display will show “ BUSY “ as below illustration. 8. Complete to format SD card in MV500, and then press “ Down Arrow “ Button of MV500 until you scroll to USB icon of MV500, and make sure the setting is in Mode.
Page 3
3. If LCD screen show you the message as “ USB mode “ in display after USB connection between PC and MV500, it means your camera setting is in USB mode now, by this way, you can copy the file from camera to PC directly.
Page 4
Control Panel under PC Windows system. But you will find out the information of removable disk from Explorer of Windows system, the disk information of Take-it MV500 in PC Windows system will show you as below illustration. All of Video / Photo files in camera will...
Need help?
Do you have a question about the MV500 and is the answer not in the manual?
Questions and answers