Getting Started Attaching The Strap; Loading The Battery - Microtek Take-it MV500 User Manual

Getting Started
Attaching the Strap
1. Thread the strap through
the strap ring of the DV
camera as shown.
2. Fasten the two ends of the
strip as shown.
Ensure that the strap is
adjusted correctly to fit your
hand.
3. Fasten the grip pad around
the strap as shown.

1. Loading the Battery

Power accessories you receive depends on the
configuration of the DV camera purchased.
1. Ensure the DV camera is
turned off; then push the
battery door latch in the
direction indicated by the
arrow to open the
battery door.
2. Insert the battery into the
compartment.
Depending on the
configuration of the DV
camera that you purchased,
you can use either a
rechargeable Lithium (3.7V)
ion battery, or four AAA-
sized alkaline batteries. Insert
the batteries (Lithium ion or
alkaline) as shown in the
two lower illustrations on
the right.
17