Color Matching Setup - Microtek ScanMaker i700 User Manual

Menu bar
Negative, such as the negative film you use for your camera.
The default scan material depends upon the scanner you are using,
and the choices available to you in the scan material drop-down
menu will also depend on your equipment.
If you are scanning negatives or positives, make sure you specify
the correct scan material, or you will get inaccurate scanning
results.
To select your scan material, choose it from the scan material drop-
down menu.

Color Matching Setup

Color Matching is an important feature of ScanWizard 5 that ensures
color is displayed consistently — from the initial input stage when an
image is captured by the scanner, to the final output stage when the
image is output to your monitor or printer (through either the Kodak
CMS or Apple ColorSync™ technology). Color matching was
developed to allow an equivalent "mapping" of colors from one
device or from one color space to another, ensuring that no major
color shifts occur in the transference process.
To use the ScanWizard 5 color matching function:
1. Set up the Kodak CMS and Apple ColorSync features correctly
at the time that ScanWizard 5 is installed. For more
information on this procedure, refer to your Kodak or Apple
system documentation.
2. The first time you launch ScanWizard 5, you will be prompted
to set up color matching for your scanner. You may also access
the color matching parameters for ScanWizard 5 at any time in
the future, by choosing the Color Matching Setup command in
the Preferences menu. ScanWizard 5 includes several industry-
standard ICC color profiles.
file:///D|/sw56/Menu_bar.htm (8 of 20) [12/16/03 11:57:50 PM]