Advertisement
Dear music lover,
thank you for purchasing this Pro-Ject Audio Systems´ product.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
Safety instructions
AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the
voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to connect/disconnect the unit from the mains. Make sure that the power supply
is easily accessible at all times. Never handle the device, the power supply while your hands are wet or
damp. Avoid letting liquids enter the device or the power supply. Never place any item containing
liquid, such as a flower vase on or near the device. Never spill any liquid on the device or the power
supply. Never place any naked flame sources, such as lighted candles on or near the device. The product
shall not be used in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar
conditions.
Connectors
Make all connections whilst the device is disconnected from the power supply.
Take care to connect the left and right channels correctly. The right channel is usually marked red, the
left channel black or white. Never use any other power supply than the one supplied with the unit!
Line In
Connect the output of the phono preamplifier to the RCA Line In.
Line Out
Connect the Line Out of your Vinyl NRS Box S3 to a line input of your preamplifier or integrated amplifier.
Mains power connection
Connect the low voltage plug from the power supply to the Power 18V DC socket of the amplifier before
connecting the power supply to the mains.
2
© Pro-Ject Audio Systems · Vinyl NRS Box S3 · Revision 2022.05.09
Advertisement
