Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Pro-Ject Audio Systems Box RS
Summary of Contents for Pro-Ject Audio Systems Box RS
- Page 1 INSTRUCTIONS FOR USE Pro-Ject Phono Box RS...
-
Page 2: Safety Instructions
Use the dip switches at the back of the unit and the rotary control at the front to set input capacitance and input impedance. Please set both channels equally. To alter settings MUTE must be engaged. Input impedance setting (variable) can be done while listening. © Pro-Ject Audio Systems · Pro-Ject Phono Box RS · Revision 2014.10.27... - Page 3 *, impedance 10ohms. The rocker bswitch F/ V must be set to F. The rocker switch on the right hand side sellects 2 3 4 the input gain. © Pro-Ject Audio Systems · Pro-Ject Phono Box RS · Revision 2014.10.27...
- Page 4 The literature for cartridges should also specify the correct input impedance (low-output MC cartridges) and the correct input capacitance (high-output MC and MM cartridges), into which the cartridge is designed to work. If in doubt please consult your dealer. © Pro-Ject Audio Systems · Pro-Ject Phono Box RS · Revision 2014.10.27...
-
Page 5: Subsonic Filter
Mains power connection Connect the low voltage plug from the power supply to the Power 2x18V socket of the phono amplifier before connecting the power supply to the mains. © Pro-Ject Audio Systems · Pro-Ject Phono Box RS · Revision 2014.10.27... - Page 6 This guide was produced by: Pro-Ject Audio Systems changes to the technical specification without prior Copyright © 2014. All rights reserved. notice as deemed necessary to uphold the ongoing process of technical development. © Pro-Ject Audio Systems · Pro-Ject Phono Box RS · Revision 2014.10.27...
Need help?
Do you have a question about the Box RS and is the answer not in the manual?
Questions and answers