Microtek ScanMaker 8700 Install Manual page 4

Supplementary steps to
activate your FireWire scanner
on Windows 98 SE
1. Open the System Properties System Properties dialog box by doing the System Properties System Properties System Properties
following in succession: Start
Panel Panel, and then double-click the System Panel
Panel Panel
2. From the System Properties System Properties, select the Device System Properties System Properties System Properties
Manager Manager Manager Manager tab, then double-click [?] IEEE 1394 SBP2 Manager
Device Device Device to open its Device properties Device Device Device properties dialog box. Device properties Device properties Device properties
Driver Driver
3. On the Driver Driver Driver tab, click the Reinstall Driver
Start Start, Settings Start Settings, Control Settings Settings Control Control Control
Start Settings Control
System System icon. System
System
Device Device Device Device
[?] IEEE 1394 SBP2 [?] IEEE 1394 SBP2 [?] IEEE 1394 SBP2 [?] IEEE 1394 SBP2
Reinstall Driver Reinstall Driver
Reinstall Driver Reinstall Driver button.
4. A series of dialog boxes will appear one at a time --
follow the instructions on the screen as shown below,
Next Next
and then click Next Next respectively. Next
5. When the driver has been successfully updated, a dialog
box will prompt this message: "Windows has
finished installing an updated driver for your finished installing an updated driver for your finished installing an updated driver for your finished installing an updated driver for your finished installing an updated driver for your
hardware device". Open the System Properties hardware device hardware device hardware device hardware device
Device Manager Device Manager Device Manager dialog box (Step 1 and 2), then click
Device Manager Device Manager
the plus (+) sign adjacent to the Imaging Device.
scanner name and model appears on the list -- this
means that Windows has detected and re-installed your
device successfully.
4
Click Browse Browse Browse Browse
Browse
to locate
C:\WINDOWS\INF,
and then
click Next Next Next Next (where
Next
C:\WINDOWS is
your system folder).
Windows has Windows has Windows has Windows has
System Properties System Properties - System Properties System Properties
Imaging Device. Imaging Device. Imaging Device. The
Imaging Device.