GE IC754VSI12CTD Operator Interface Products page 59

5. Tap Next. The Modem or Device dialog box appears, depending on the
connection type.
6. From the list, choose the device or modem you want to use. (If a serial
CF card is inserted, it is available in the device list.)
You can configure your device or TCP/IP Settings at this time if you
wish.
7. Tap Finish for direct connection (Device dialog box) or Next for dial-up
(Modem dialog box).
If you are adding a dial-up connection the following dialog box appears.
8. Type the destination Country/region code, Area code, and Phone
number in the appropriate boxes.
9. Select or clear the Force Long Distance or Force Local check boxes.
10. Tap Finish.
GFK-2306E
or
Chapter 4 Detailed Operation
4
4-17