GE IC754VSI12CTD Operator Interface Products page 54

4
Upper case characters are accessed by pressing the SHIFT key once. This is
equivalent to holding down the SHIFT key on a conventional keyboard. The
SHIFT key is active while the next key is pressed then reverts back to its
unselected state. The CAP key does the same thing as SHIFT but does not
revert to lower case after another key is pressed. Pressing the CAP key causes
the Soft Input Panel to remain in upper case mode. The CTRL and ALT keys
behave the same as the SHIFT key.
Upper Case
To reset the SIP Location
If you accidentally drop the SIP off screen and can‟t drag it back on screen,
complete the following steps to reset the SIP to the center of the screen.
1. In the Control Panel, double-tap Input Panel.
The Input Panel Properties dialog box, shown on page 4-11), appears.
2. Click Reset SIP location.
12" QuickPanel* View Intermediate, Color and Monochrome – December 2010
4-12 GFK-2306E