GE IC754VSI12CTD Operator Interface Products page 51

To set the double-tap sensitivity
1. In the Control Panel, double-tap
The Stylus Properties dialog box appears.
2. Choose the Double-Tap tab.
3. Double-tap the grid to enter a setting.
4. Double-tap the test icon to check the setting.
If the test icon doesn‟t change when you double-tap it, double-tap the
grid again.
5. Tap OK to finish.
6. To save the settings, run the Backup utility. (See page 2-10.)
GFK-2306E
Stylus.
Chapter 4 Detailed Operation
4
4-9