Microtek ArtixScan M1 Pro User Manual page 70

This section contains important information on further steps you need to take to
achieve color matching across your devices. If you need more details on ColorSync or
any of the third-party application programs discussed in this section, refer to the
respective user guides of those programs.
Calibrating your monitor to obtain the proper monitor profile is important for
achieving higher precision in color matching. ICC profiles for your monitor may be
created specifically by profiling your monitor through the following utilities:
• The Calibration function of the Monitor Control Panel for ColorSync 2.5 or later.
• The Adobe Gamma utility, from Adobe Photoshop 5.0 or later package.
• Any third-party calibration programs or hardware calibrator
You can also obtain your monitor profile by checking with the manufacturer of your
monitor.
After creating or identifying the monitor profile, you need to select the profile to
make sure the image is displayed correctly.
Make sure you always update your ColorSync program to the most recent version. If
you have ColorSync earlier than version 2.5, please update it to the most recent
version available.
To select the system monitor profile, bring up the Monitor Control Panel. An example
is shown below.
After selecting your monitor profile, you will see the profile changed in the
ColorSync Control Panel, as shown in the example below.