Microtek ArtixScan M1 Pro User Manual page 58

ScanWizard Pro provides a way to use the SnapTrans™
templates on scanners featuring the E.D.I.T technology.
The templates are holders designed to secure a variety of
film, such as 4" x 5" film, 6cm x 9cm film, , 35mm
filmstrips, and 35mm mounted slides (that can be mounted
in either landscape or portrait orientation).
This scenario shows you how to choose a particular
template, which then loads predefined scan jobs for you to
help in automating the scanning process.
1. Go to the Preview window, and in the File menu,
choose the SnapTrans Templates command. The
SnapTrans Templates dialog box appears.
2. Choose the correct scan material.
3. Select the template to be loaded by clicking the
template icon.
4. Take note of the folder to where the scan jobs will be
saved to, or specify your own folder location.
5. Click the Create button. The selected set of predefined
scan jobs based on the template you chose is copied to
your designated folder; i.e., a new "Context" folder has
been created for you. The Scan Job window will also
show the predefined scan jobs.
6. From hereon, do an overview to see the images in the
Preview window, and continue with the process of
matching each overview image with each of the
predefined scan jobs in the Scan Job window.
7. When you are finished, click the Scan button in the
Preview window to start scanning with the use of your
selected SnapTrans template.
: The predefined scan jobs that are created in this
process are in their default settings, and these settings
are usually not what you want. To change the settings
easily among multiple scan jobs, see the "How to Edit
Multiple Scan Jobs" scenario.
Go to the Settings window, and from
the Type box, choose the appropriate
image type for the image to be
scanned.
Go to the Preview window, highlight
the scan job you wish to see in detail,
and click the Prescan button.
Go to the Preview window, and select
the desired image-processing option
from the Correction menu. Alterna-
tively, you can go to the Settings
window and click on an image
processing button.