Microtek ArtixScan M1 Pro User Manual page 11

This section of the manual describes the two modes of operating ScanWizard Pro:
1. The Scan mode, in which ScanWizard Pro is "acquired" from an image-editing
software program like Adobe Photoshop; and
2. The Batch mode, which is launched from the Apple menu and is used to process
batch scans.
The Scan mode refers to launching ScanWizard Pro from an image-editing software
such as Adobe Photoshop.
To operate ScanWizard Pro in the "Scan" mode, launch the image-editing software
of your choice. When the software program launches, go to the File menu, and
choose Import or Acquire from the submenu, depending on the software you are
using. This will automatically launch ScanWizard Pro, and the four major windows
that form the interface of ScanWizard Pro will appear on your screen.
In addition to the above, you can run the ScanWizard Pro Applet located in the
ScanWizard Pro folder. The Applet is a small-sized application that will launch the
ScanWizard Pro Plug-in to scan images.
The Batch mode of operating ScanWizard Pro allows you to set up scans in "batches"
of jobs beforehand and then lets you start the scanning process when you are ready to
do so with the simple click of a button.
To operate ScanWizard Pro in the "batch" mode, go to the Apple menu, and choose
the Batch Scan command. For more details, refer to the batch scan scenarios and
information presented in the Special Features & Advanced Scenarios section of this
manual.
To exit ScanWizard Pro, go to the Preview window, and from the File menu, choose
the Quit command, or press the Apple+Q combination keys on your keyboard.