Microtek ArtixScan M1 Pro User Manual page 16

1. Place the photograph to be scanned on your
scanner's glass bed.
2. Go to the Preview window and click the Scan
Material icon. From the submenu that appears,
choose Reflective. You will notice the change in the
appearance of the icon.
3. Click the Overview button to start an overview, and
you will see the image appear in your Preview
window.
4. Select the Scan Frame tool from the Toolbar in the
Preview window, and choose the area to be scanned
by dragging a rectangle around it. You will see a
flashing frame (marquee) around the selected area.
5. If you like what you see in the Preview window,
click the Scan button to start scanning.
Go to the Settings window, and from the
Type box, choose the appropriate image
type for the image to be scanned.
Go to the Settings window, and enter the
desired output dimensions (width and
height) in the output dimension edit
boxes. The scan frame may change
slightly, and you may want to go back to
the Preview window to move the scan
frame and enclose the area you want.
Go to the Settings window, and enter the
resolution value in the Resolution edit
box.
Go to the Preview window, highlight the
scan job you wish to see in detail, and
click the Prescan button. Then switch to
the Prescan view in the View menu.
Go to the Preview window, and select
the desired image-processing option
from the Correction menu. Alternatively,
you can go to the Settings window and
click an image processing button; the
Advanced Image Correction dialog box
will then appear.