Microtek ArtixScan M1 Pro User Manual page 52

ScanWizard Pro lets you edit multiple scan jobs at the
same time, increasing your efficiency in using the
software.
In the scenario below, each scan job has its own image
type setting (RGB, CMYK, Lab Color) and its own
resolution setting (from 100 to 300 dpi). With multiple job
editing, you can select all the jobs and then change their
image type and resolution in a few quick steps, and then,
say, apply a filter to all the images.
1. Define the scan jobs in your Scan Job window. If you
wish to see how this scenario works, try setting up each
scan job as a different image type with its own
resolution, so that each of the jobs has varying settings.
2. Select all three scan jobs in the Scan Job window. To
include each scan job for selection, use the Shift +
Click combination (pressing the Shift key while
clicking the mouse at the same time).
3. Go to the Settings window, and choose an image type
that will apply to all the scan jobs. In the example here,
we selected CMYK.
4. Choose a resolution setting that will apply to all the
scan jobs. In the example here, we selected 300 dpi.
5. As a last step, apply a filter to all the scan jobs. In the
example here, we chose the Unsharp Masking filter.
Take note that any of the Advanced Image Correction
tools (such as the filters) can be applied to scan jobs
simultaneously only if the jobs are of a similar image
type (in this case, all CMYK).
Go to the Preview window, and select
the desired image-processing option
from the Correction menu. Alterna-
tively, you can go to the Settings
window and click on an image
processing button. If all your images
are of the same type, you can edit and
apply image corrections to all the
selected scan jobs simultaneously.