Microtek ArtixScan M1 Pro User Manual page 63

The previous two sections showed you how to create a new batch folder and how to
load a previously saved batch folder. Now it is time to execute the scan jobs in the
batch folder. The sample scenario below shows how this can be done.
1. Go to your Apple Menu, and choose Batch Scan to start the program.
2. When the Batch Scan program starts, go to the Batch menu, and choose Execute.
3. When the browser dialog box appears, select the folder containing the batch scans
to be loaded, and click the Select... button at the bottom center of the dialog box.
Batch scanning will start immediately; the ScanWizard Pro interface will not
appear.