Maintenance - Microtek VX2 User Manual

MAINTENANCE

This projector only needs simple maintenance.
1. Keep the lens clean so that the shadow of dust or stains will not appear on
the screen.
2. Clean the air filter located at the bottom of the projector. If the air filter is
blocked by dust, this will cause bad ventilation and shorten the life of the
projector, contributing to malfunctions from overheating.
Attention: When cleaning any section of the projector, the power should be turned
off, and the power cord should be unplugged.
Warning: Never open or try to open any covers of the projector except the cover of
the lamp, filter, and lens. When the projector is operated, it emits high voltage of
electricity and heat. Improper operation will cause you severe injury. Except what
is specifically indicated in this manual, never try to do any other maintenance. You
should have qualified service personnel conduct any service maintenance.
ＶＸ２．ｐ６５
39 02-10-18, 11:05