How To Access The Osd Menu; How To Change Osd Settings; Osd Menu - Microtek VX2 User Manual

How to Access the OSD Menu

Press the MENU key (on the top control panel of the projector or the
remote control) and the main menu window will be displayed at the top
left of the projected image. Press the MENU key again (on the top
control panel of the projector or the remote control) to close the main
menu window and to deactivate the OSD setting.
The icon you select on the OSD menu will be marked in blue.

How to Change OSD Settings

You may use the DIRECTION key on the remote control to choose the
setting of the item you want to revise. Then, press the LEFT CLICK or
RIGHT CLICK key for confirmation, and the submenu will appear for
further settings.
You may also utilize the SYNC
select a certain item and press the ENTER key for confirmation. The
submenu will then appear.
When the submenu is displayed, you may utilize the DIRECTION key
on the remote control or the Direction key on the top operation panel to
select the item which setting needs to be revised. Then, utilize the
DIRECTION key or the Direction key on the top operation panel to
adjust the settings.
To go back to the upper-level menu, you need to press the MENU key
on the remote control or on the top control panel.
To show the OSD box or to conceal it, you need to go back to the
home menu and press the MENU key on the remote control or on the
top control panel.

OSD Menu

You may revise the default settings of the computer signals under the OSD
menu.
ＶＸ２．ｐ６５
or SYNC
33
key in the OSD menu to
02-10-18, 11:05