Using The Osd Menu - Microtek VX2 User Manual

USING THE OSD MENU

The functions offered by the OSD menu of this projector are as follows:
Adjusts the input signal of the projected image in its brightness, black
level, contrast, position and the interface of the remote-control mouse.
Adjusts the input signal of the projected image in its phase & tracking
(Image), sharpness, saturation, hue and Flash Tone(Video).
Adjusts the volume and to select the type of input signal.
Selects the projection mode in front, ceiling, rear and ceiling & rear
projection; to select the language, the content of the input signal and
the consumed lamp life (Information).
Revise and save the settings of OSD menu.
Keystone correction (Keystone)
ＶＸ２．ｐ６５
32 02-10-18, 11:05