Table of Contents
Advertisement
AXIS C1610-VE Network Sound Projector
Additional settings
4.3
Enter a name for the rule.
4.4 Under Condition, select Speaker test result.
4.5 Under Speaker test status, select Didn't pass the test.
4.6
Under Action, select Send notification to email.
4.7
Under Recipient, select your recipient ("Speaker test recipients")
4.8
Enter a subject and a message, and click Save.
Play audio when a camera detects motion
This example explains how to set up the audio device to play an audio clip when an Axis network camera detects motion.
Prerequisites
•
The Axis audio device and Axis network camera are located on the same network.
•
The motion detection application is configured and running in the camera.
1. Prepare an audio clip link:
1.1 Go to Audio > Audio clips.
1.2 Click
1.3 Set the volume and number of times to repeat the clip.
1.4 Click the copy icon to copy the link.
2. Create an action rule:
2.1 Go to System > Events > Recipients.
2.2 Click + Add recipient.
2.3 Type a name for the recipient, for example "Speaker".
2.4 Select HTTP from the Type drop-down list.
2.5 Paste the configured link from the audio device in the URL field.
2.6 Enter the user name and password of the audio device.
2.7 Click Save.
2.8 Go to Rules and click + Add a rule.
2.9 Type a name for the action rule, for example "Play clip".
2.10 From the Condition list, select a video motion detection alternative under Applications.
Note
If there are no options for video motion detection, then go to Apps, click AXIS Video Motion Detection and
turn on motion detection.
2.11 From the Action list, select Send notification through HTTP.
2.12 Under Recipient, select your recipient.
2.13 Click Save.
> Create link for an audio clip.
9
Advertisement
Table of Contents
