Table of Contents
Advertisement
AXIS C1610-VE Network Sound Projector
Additional settings
Stop audio with DTMF
This example explains how to:
•
Configure DTMF on a device.
•
Set up an event to stop the audio when a DTMF command is sent to the device.
1. Go to System > SIP > SIP settings.
2. Make sure Enable SIP is turned on.
If you need to turn it on, remember to click Save afterwards.
3. Go to SIP accounts.
4. Next to the SIP account, click
5. Under DTMF, click + DTMF sequence.
6.
Under Sequence, enter "1".
7. Under Description, enter "stop audio".
8. Click Save.
9. Go to System > Events > Rules and click + Add a rule.
10. Under Name, enter "DTMF stop audio".
11. Under Condition, select DTMF.
12. Under DTMF Event ID, select stop audio.
13. Under Action, select Stop playing audio clip.
14. Click Save.
Set up audio for incoming SIP calls
You can set up a rule that plays an audio clip when you receive a SIP call.
You can also set up an additional rule that answers the SIP call automatically after the audio clip has ended. This can be useful in
cases where an alarm operator wants to call the attention of someone near an audio device and establish a line of communication.
This is done by making a SIP call to the audio device, which will play an audio clip to alert the persons near the audio device. When
the audio clip has stopped playing, the SIP call is automatically answered by the audio device and communication between the alarm
operator and the persons near the audio device can take place.
Enable SIP settings:
1. Go to the device interface of the speaker, by entering its IP address in a web browser.
2. Go to System > SIP > SIP settings and select Enable SIP.
3. To allow the device to receive incoming calls, select Allow incoming calls.
4. Click Save.
5. Go to SIP accounts.
6. Next to the SIP account, click
7. Uncheck Answer automatically.
> Edit.
> Edit.
10
Advertisement
Table of Contents
