Axis C1610-VE User Manual
  1. Manuals
  2. Brands
  3. Axis Manuals
  4. Projector
  5. C1610-VE
  6. User manual

Axis C1610-VE User Manual

Network sound projector
Hide thumbs Also See for C1610-VE:
Table of Contents

Advertisement

Quick Links

Download this manual
AXIS C1610-VE Network Sound Projector
User Manual

Advertisement

Table of Contents
loading

Related Manuals for Axis C1610-VE

Summary of Contents for Axis C1610-VE

  • Page 1 AXIS C1610-VE Network Sound Projector User Manual...
  • Page 2 • AXIS Audio Manager Edge — Audio management software for small systems. Comes pre-installed on all audio devices with a firmware equal to or higher than 10.0. AXIS Audio Manager Edge user manual •...
  • Page 3 AXIS C1610-VE Network Sound Projector Installation Installation To watch this video, go to the web version of this document. help.axis.com/?&piaId=72697&section=c1610-ve-installation-video...

  • Page 4: Find The Device On The Network

    Get started Find the device on the network To find Axis devices on the network and assign them IP addresses in Windows®, use AXIS IP Utility or AXIS Device Manager. Both applications are free and can be downloaded from axis.com/support.
  • Page 5 AXIS C1610-VE Network Sound Projector Get started • Don’t expose the password. • Change the password at a recurring interval, at least once a year.
  • Page 6 1. Go to the device interface > Audio > Speaker test. 2. To calibrate the audio device, click Calibrate. Note Once the Axis product is calibrated, the speaker test can be run at any time. 3. To run the speaker test, click Run the test. Note It is also possible to run the calibration by pressing the control button on the physical device.
  • Page 7 AXIS C1610-VE Network Sound Projector Additional settings Note Use NAT traversal when the device is connected to the network from behind a NAT router or a firewall. For more information see NAT traversal on page 13. 6. Under Audio, select at least one audio codec with the desired audio quality for SIP calls. Drag-and-drop to change the priority.
  • Page 8 AXIS C1610-VE Network Sound Projector Additional settings Set up rules for events You can create rules to make your device perform actions when certain events occur. A rule consists of conditions and actions. The conditions can be used to trigger the actions. For example, the device can play an audio clip according to a schedule or when it receives a call, or send an email if the device changes IP address.
  • Page 9 Enter a subject and a message, and click Save. Play audio when a camera detects motion This example explains how to set up the audio device to play an audio clip when an Axis network camera detects motion. Prerequisites •...
  • Page 10 AXIS C1610-VE Network Sound Projector Additional settings Stop audio with DTMF This example explains how to: • Configure DTMF on a device. • Set up an event to stop the audio when a DTMF command is sent to the device.
  • Page 11 AXIS C1610-VE Network Sound Projector Additional settings Play audio when a SIP call is received: 1. Go to Settings > System > Events > Rules and add a rule. 2. Type a name for the rule. 3. In the list of conditions, select State.

  • Page 12: Session Initiation Protocol (Sip)

    The Session Initiation Protocol (SIP) is used to set up, maintain and terminate VoIP calls. You can make calls between two or more parties, called SIP user agents. To make a SIP call you can use, for example, SIP phones, softphones or SIP-enabled Axis devices.

  • Page 13: Nat Traversal

    NAT traversal Use NAT (Network Address Translation) traversal when the Axis device is located on an private network (LAN) and you want to access it from outside of that network. Note The router must support NAT traversal and UPnP®.
  • Page 14 AXIS C1610-VE Network Sound Projector The device interface The device interface To reach the device interface, type the device’s IP address in a web browser. Note Support for the features and settings described in this section varies between devices. Show or hide the main menu.

  • Page 15: Device Settings

    Locate device: Click to play a sound that helps you identify the speaker. For some products, a LED will flash on the device. Calibrate : Click to calibrate the speaker. Launch AXIS Audio Manager Edge: Click to launch the application. Device settings Input: Turn on or off audio input. Shows the type of input.

  • Page 16: Audio Clips

    AXIS C1610-VE Network Sound Projector The device interface Output: Shows the type of output. Gain: Use the slider to change the gain. Click the speaker icon to mute or unmute. Stream Encoding: Select the encoding to use for the input source streaming. You can only choose encoding if audio input is turned on. If audio input is turned off, click Enable audio input to turn it on.

  • Page 17: Speaker Test

    AXIS C1610-VE Network Sound Projector The device interface Speaker test You can use the speaker test to verify from a remote location that the speaker works as intended. Calibrate: Click to calibrate the speaker before you test it for the first time. During calibration, the speaker plays a series of test tones that are registered by the built-in microphone.
  • Page 18 AXIS C1610-VE Network Sound Projector The device interface Click to stop playing the recording.
  • Page 19 AXIS C1610-VE Network Sound Projector The device interface Click to show more information and options about the recording. Set export range: If you only want to export part of the recording, enter from when to when. Click to delete the recording.

  • Page 20: Date And Time

    • Activate license with a key: If the app requires a license, you need to activate it. Use this option if your device doesn’t have internet access. If you don’t have a license key, go to axis.com/applications. You need a license code and the Axis product serial number to generate a license key.
  • Page 21 AXIS C1610-VE Network Sound Projector The device interface Network IPv4 Assign IPv4 automatically: Select to let the network router assign an IP address to the device automatically. We recommend automatic IP (DHCP) for most networks. IP address: Enter a unique IP address for the device. Static IP addresses can be assigned at random within isolated networks, provided that each address is unique.
  • Page 22 One-click cloud connection One-click cloud connection (O3C) together with an O3C service provides easy and secure internet access to live and recorded video from any location. For more information, see axis.com/end-to-end-solutions/hosted-services. Allow O3C: • One-click: The default setting. Press and hold the control button on the device to connect to an O3C service over the internet.
  • Page 23 Authentication failed: Sends a trap message when an authentication attempt fails. Note All Axis Video MIB traps are enabled when you turn on SNMP v1 and v2c traps. For more information, see AXIS OS Portal > SNMP. • v3: SNMP v3 is a more secure version, which provides encryption and secure passwords. To use SNMP v3, we recommend you to activate HTTPS, as the password is then sent through HTTPS.
  • Page 24 To install test firmware or other custom firmware from Axis on the device, you need a custom-signed firmware certificate. The certificate verifies that the firmware is approved by both the device owner and Axis. The firmware can only run on a specific device which is identified by its unique serial number and chip ID.
  • Page 25 AXIS C1610-VE Network Sound Projector The device interface Users Add user: Click to add a new user. You can add up to 100 users. Username: Enter a unique username. New password: Enter a password for the user. Passwords must be 1 to 64 characters long. Only ASCII printable characters (code 32 to 126) are allowed in the password, for example letters, numbers, punctuation, and some symbols.
  • Page 26 AXIS C1610-VE Network Sound Projector The device interface Add a condition: Click to add an additional condition. Action: Select an action from the list and enter its required information. For information about specific actions, see Get started with rules for events.
  • Page 27 RSA is the preferred method during negotiation, followed by ECDSA, ED25519, and DSA. Make sure to enter the right MD5 host key that is used by your SFTP server. While the Axis device supports both MD5 and SHA-256 hash keys, we recommend using SHA-256 due to stronger security over MD5. For more information on how to configure an SFTP server with an Axis device, go to the AXIS OS Portal.
  • Page 28 IoT integration and is used in a wide variety of industries to connect remote devices with a small code footprint and minimal network bandwidth. The MQTT client in Axis device firmware can simplify integration of data and events produced in the device to systems which are not video management systems (VMS).
  • Page 29 AXIS C1610-VE Network Sound Projector The device interface Connect: Turn on or off the MQTT client. Status: Shows the current status of the MQTT client. Broker Host: Enter the hostname or IP address of the MQTT server. Protocol: Select which protocol to use.
  • Page 30 AXIS C1610-VE Network Sound Projector The device interface QoS: Change the QoS layer for the packet flow. MQTT publication Use default topic prefix: Select to use the default topic prefix, that is defined in the device topic prefix in the MQTT client tab.
  • Page 31 AXIS C1610-VE Network Sound Projector The device interface • TLS port: The network port used for encrypted SIP communication. The signaling traffic through this port is encrypted with Transport Layer Security (TLS). The default port number is 5061. Enter a different port number if required.
  • Page 32 AXIS C1610-VE Network Sound Projector The device interface • Name: Enter a descriptive name. This can, for example, be a first and last name, a role, or a location. The name is not unique. • User ID: Enter the unique extension or phone number assigned to the device.
  • Page 33 DNS. Windows SMB/CIFS names are not supported. • Network share: Enter the name of the shared location on the host server. Several Axis devices can use the same network share, since each device gets its own folder.
  • Page 34 Delete user: Delete the user. You can’t delete the root user. By creating an ONVIF user, you automatically enable ONVIF communication. Use the username and password for all ONVIF communication with the device. For more information see the Axis Developer Community at axis.com. ONVIF media profiles An ONVIF media profile consists of a set of configurations that you can use to change media stream settings.
  • Page 35 AXIS C1610-VE Network Sound Projector The device interface Detectors Audio detection These settings are available for each audio input. Sound level: Adjust the sound level to a value from 0–100, where 0 is the most sensitive and 100 the least sensitive. Use the activity indicator as a guide when you set the sound level.

  • Page 36: Maintenance

    To supervise the connection requires additional hardware (end-of-line resistors) in the external I/O loop. Plain config Plain config is for advanced users with experience of Axis device configuration. Most parameters can be set and edited from this page.
  • Page 37 Note All Axis device firmware is digitally signed to ensure that you only install verified firmware on your device. This further increases the overall minimum cybersecurity level of Axis devices. For more information, see the white paper “Signed firmware, secure boot, and security of private keys” at axis.com.

  • Page 38: Reset To Factory Default Settings

    Always read the upgrade instructions and release notes available with each new release before you upgrade the firmware. To find the latest firmware and the release notes, go to axis.com/support/firmware. 1. Download the firmware file to your computer, available free of charge at axis.com/support/firmware. 2. Log in to the device as an administrator.

  • Page 39: Technical Issues, Clues And Solutions

    Axis device. Check all cabling and reinstall the device. Possible IP address conflict The static IP address in the Axis device is used before the DHCP server sets a dynamic address. with another device on the...

  • Page 40: Performance Considerations

    When setting up your system, it is important to consider how various settings and situations affect the amount of needed bandwidth (the bitrate) required. The following factors are the most important to consider: • Heavy network utilization due to poor infrastructure affects the bandwidth. • Running multiple AXIS Camera Application Platform (ACAP) applications simultaneously may affect the general performance.

  • Page 41: Product Overview

    AXIS C1610-VE Network Sound Projector Specifications Specifications Product overview Mesh Microphone disable switch on page 41 SD card slot I/O connector on page 42 Status LED indicator, see LED indicators on page 41 Control button on page 41 Network connector on page 42...
  • Page 42 The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall be intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer’s instructions. For information about regulatory requirements, see the Installation Guide at www.axis.com. I/O connector Use the I/O connector with external devices in combination with, for example, motion detection, event triggering, and alarm notifications.
  • Page 43 AXIS C1610-VE Network Sound Projector Specifications DC ground DC output 12 V, max 50mA I/O configured as input I/O configured as output...
  • Page 44 AXIS C1610-VE Network Sound Projector API commands API commands VAPIX® is Axis’ own open API (Application Programming Interface). You can control almost all functionality available in Axis devices through VAPIX®. To get access to the complete VAPIX® documentation, join Axis Developer Community at axis.com/developer-community Enter the commands in a web browser, and replace <deviceIP>...
  • Page 45 AXIS C1610-VE Network Sound Projector API commands Disable FTP Request http://<deviceIP>/axis-cgi/param.cgi?action=update&Network.FTP.Enabled=no Example Enable SSH Request http://<deviceIP>/axis-cgi/param.cgi?action=update&Network.SSH.Enabled=yes Example Disable SSH Request http://<deviceIP>/axis-cgi/param.cgi?action=update&Network.SSH.Enabled=no...
  • Page 46 User Manual Ver. M2.2 AXIS C1610-VE Network Sound Projector Date: January 2023 © Axis Communications AB, 2023 Part No. T10186021...

Table of Contents