Axis C1610-VE User Manual page 26

AXIS C1610-VE Network Sound Projector
The device interface
Add a condition: Click to add an additional condition.
Action: Select an action from the list and enter its required information. For information about specific actions, see
Get started with rules for events.
Your product may have some of the following pre-configured rules:
Front-facing LED Activation: LiveStream: When the microphone is turned on and a live stream is received, then the front-facing
LED on the audio device will turn green.
Front-facing LED Activation: Recording : When the microphone is turned on and a recording is ongoing, then the front-facing
LED on the audio device will turn green.
Front-facing LED Activation: SIP : When the microphone is turned on and a SIP call is active, then the front-facing LED on the
audio device will turn green. SIP must be enabled on the audio device before this event can be triggered.
Pre-announcement tone: Play tone on incoming call: When a SIP call is made to the audio device, then a pre-defined audio clip
is played. SIP must be enabled for the audio device. For the SIP caller to hear a ring tone while the audio clip is played, the SIP
account for the audio device must be configured to not answer the call automatically.
Pre-announcement tone: Answer call after incoming call-tone: When the audio clip has ended, the incoming SIP-call is
answered. SIP must be enabled for the audio device.
Loud ringer : When a SIP call is made to the audio device, a pre-defined audio clip is played as long as the rule is active. SIP
must be enabled for the audio device.
Recipients
You can set up your device to notify recipients about events or send files. The list shows all the recipients currently configured in
the product, along with information about their configuration.
Note
You can create up to 20 recipients.
Add a recipient: Click to add a recipient.
Name: Enter a name for the recipient.
Type: Select from the list:
• FTP
-
-
-
-
-
-
-
• HTTP
Host: Enter the server's IP address or hostname. If you enter a hostname, make sure that a DNS server is
specified under System > Network > IPv4 and IPv6.
Port: Enter the port number used by the FTP server. The default is 21.
Folder: Enter the path to the directory where you want to store files. If this directory doesn't already exist
on the FTP server, you will get an error message when uploading files.
Username: Enter the username for the login.
Password: Enter the password for the login.
Use temporary file name: Select to upload files with temporary, automatically generated filenames. The
files get renamed to the desired names when the upload completes. If the upload is aborted/interrupted,
you don't get any corrupt files. However, you probably still get the temporary files. This way you know that
all files that have the desired name, are correct.
Use passive FTP: Under normal circumstances the product simply requests the target FTP server to open the
data connection. The device actively initiates both the FTP control and data connections to the target server.
This is normally needed if there is a firewall between the device and the target FTP server.
26