First steps (2)
In the PC software go to Menu > Configuration > System > Operation Settings > Clients / Security.
▪
Enter the Windows device names or IP addresses of the PCs which should access the THipPro Lite.
▪
▪
Open the Mode & Audio Line configuration page.
▪
Select an Operation Mode.
Add the channels to the studio(s) at the right.
▪
▪
Select an Audio Interfaces for each Audio Line in the Audio Assignment table.
▪
Go to the Line Interface configuration page.
Select the Line Mode (POTS and/or VoIP)
▪
If VoIP is selected, go to the VoIP (LAN/SIP) configuration page.
▪
▪
Enter the VoIP account information you received from the VoIP provider for each line.
Find more information on the following pages.
▪
25