Initial Setup - AVT MAGIC THipPro Lite Configuration Manual

Initial Setup

Connect the MAGIC THipPro Lite to the mains.
▪
Configure the IP address of the LAN interface via
▪
the front display as shown on the right.
The MAGIC THipPro Lite can be configured to use
▪
DHCP later via the PC software on the LAN
INTERFACE configuration page.
Subsequently also configure SUBNET MASK and
▪
DEFAULT GATEWAY of LAN interface 1.
Connect the socket LAN 1 of the device to the
▪
Ethernet network and connect the PC software.
All further configurations should be done using
▪
the PC software.
20