Table of Contents
Advertisement
•
Internal Speaker: Use the projector's
internal speaker to output audio.
•
ARC: Use an HDMI™ ARC compatible
device to output audio. Note: You can
select this only when a compatible
device is connected. To learn how to
connect such a device, see Connect to
a device through HDMI™ ARC, page
15.
•
Bluetooth: Use a Bluetooth device
paired with the projector to output
audio. To learn how to connect a
Bluetooth device, see Connect to a
Bluetooth device, page 16.
Volume: Adjust the volume. Note: After
•
selecting this menu item, you can adjust
volume by pressing
control only.
•
Bass: Set the bass level.
•
Treble: Set the treble level.
•
Reset to Default: Select Yes to reset all the
sound settings above.
Image settings
You can view and change the following image
settings.
•
Locations: You can select a location and
then modify the image settings. All the
modified image settings will be associated
with the selected (current) location. You
can create up to 3 different sets of image
settings this way and quickly switch
between them by selecting a location. Tip:
The projector always selects the last used
location after being restarted.
•
Room 1: Select this to use or modify the
image settings for Room 1.
•
Room 2: Select this to use or modify the
image settings for Room 2.
•
Room 3: Select this to use or modify the
image settings for Room 3.
•
Projection Direction: Adjust the projection
to the correct direction based on how the
projector is installed.
•
Auto Keystone: Turn auto keystone
correction on or off by selecting Yes or No.
25
/
on the remote
•
Four Point Keystone: Select this to manually
make the image rectangular by moving four
corners of the image. This menu item is
visible only when auto keystone correction
is off.
•
H/V Keystone: Select this to manually make
the image rectangular by adjusting the
horizontal and vertical keystone angles.
This menu item is visible only when auto
keystone correction is off.
•
Digital Zoom: Scale down the screen to up
to 60% of its full size. The default value is
100% (no scale-down).
•
Reset to Default: Select Yes to reset all the
image settings above except Projection
Direction for the current location (Room
1/2/3). The other two locations will not be
affected.
Other settings
You can view and change the following
additional settings.
•
Language: Select your preferred display
language.
•
Sleep Timer: Select a period of time after
which the projector turns off automatically.
The default value is Disabled.
•
Information: View the hardware version,
software version, serial number and MAC
address of this product.
•
Firmware Upgrade: Update the projector's
software or factory reset the projector.
•
Online Upgrade: For more details, see
Update software online, page 26.
•
Offline Upgrade: For more details, see
Update software offline, page 26.
•
Factory Reset: Restore the product to
its factory default settings. After the
factory reset, the projector will restart
and allow you to set it up as new.
Philips · NeoPix 320
Advertisement
Table of Contents
