Advertisement
Step 3: Insert the Gas Lift Cylinder into the Base
D (x1)
Gas Lift
Cylinder
Place the Base Cap back onto on the Base (E) and insert the Gas Lift Cylinder (D) with the rod side up.
Step 4: Attach the Armrests to the Seat
C (x1)
G (x6)
H (x1)
I (x1)
L (x1)
Seat
M6x30
Right Armrest
Left Armrest
Allen
Screws
Wrench
Align the armrests to the Seat (C) at the desired width. Screw in the Right Armrest (H) and Left Armrest (I) to the
Seat (C) using 6x M6x30 Screws (G). Tighten with the Allen Wrench (L).
P a g e | 6
Advertisement
