Table of Contents
Advertisement
USER MANUAL
Range BEAT-Tr
C
TRACEABILITY:
To modify the existing configuration of the option TRACEABILITY, proceed as follows:
WARNING !
This option might have restricted access. If enabled, the following screen
will appear initially:
OPERATOR:
Once the supervisor code has been introduced and the START/VALIDATE button pressed,
the following screen that is directly shown that not having the restriction enabled:
TRACEABILITY
<YES>/<NO>
Use the
or
VALIDATE key to accept the selection made. Click <STOP> to exit this option without
making a modification.
C
SCRAPER BARCODE:
To modify the existing configuration of the option SCRAPER BARCODE, proceed as follows:
WARNING !
This option might have restricted access. If enabled, the following screen
will appear initially:
OPERATOR:
Once the supervisor code has been introduced and the START/VALIDATE button pressed,
the following screen that is directly shown that not having the restriction enabled:
SCRAPED & CLEAN ?
<YES>/<NO>
Use the
or
VALIDATE key to accept the selection made. Click <STOP> to exit this option without
making a modification.
Edition: January 2016
Revision: No. 3
Enter the supervisor PIN number.
<YES> corresponds to the traceability identification
enabled whereas <NO> to disenabled.
keys to shift from <YES> to <NO> or vice versa. Click the START /
Enter the supervisor PIN number.
<YES> corresponds to the scraper identification via
bar-code enabled whereas <NO> to disenabled.
keys to shift from <YES> to <NO> or vice versa. Click the START /
MODE OF USE - 41
Advertisement
Table of Contents
