Table of Contents
Advertisement
USER MANUAL
Range BEAT-Tr
4.
COM1/COM2 Properties screen
5.
Connection created. When exit it is asked Do You Wish To Save? YES.
Exporting to a PC:
1.
Run the connection created in Hyper Terminal.
2.
With the unit on the >EXPORT screen, click the START/VALIDATE key.
EXPORTING RECORDS...
00%
3.
Select Transfer and Receive file... in the Hyper Terminal menu:
4.
Name of the received file will appear
5.
The file will be transferred. The BEAT-Tr display will show the progress %.
Click <STOP> to exit this option. Disconnect the transmission cable.
PENDRIVE-USB/A OPTION:
Connect a pendrive (format FAT or FAT32) to the USB/A socket (the connection can be
made at any time; it is not necessary with the unit off).
1.
With the unit on the >EXPORT screen, click the START/VALIDATE key.
EXPORTING RECORDS...
00%
2.
The file will be transferred. The unit's display will show the progress %.
3.
This will create a file in the pendrive's BEAT folder (absent the folder is created
implicitly). The file name is FUSxxx.txt, where xxx is the first available number
between 000 and 999 that determines a unique filename.
Click <STOP> to exit this option. Disconnect the memory stick.
Edition: January 2016
Revision: No. 3
Port configuration:
Bits per second:
Data bits:
Parity:
Stop bits:
Flow control:
OK
The display will show the percentage of the data
exported.
Move the received file to the following folder:
C:\....................
Use reception protocol:
Receive
File name:
The name you want. We recommend using *.txt or *.csv
extensions.
OK
The display will show the percentage of the data
exported.
Select 38400
Select 8
Select None
Select 1
Select None
the one you want.
Select Xmodem.
MODE OF USE - 31
Advertisement
Table of Contents
