Table of Contents
Advertisement
SEE FUSION RECORDS:
C
Validate the SEE FUSION RECORDS option to show the latest fusion stored in the memory.
00016 dd/mm/yy hh:mm
I AG d20
Top line: fusion no.; date; start time.
Bottom line: fitting type (I = coupler in the example); brand (AG); diameter; result
(OK=correct; ERRn=incorrect > for the errors list, see CHAPTER 4: TROUBLESHOOTING).
In the case of electrofusion with manual data entry, the display will show the following
information:
00016 dd/mm/yy hh:mm
40.0V 0020s
Top line: fusion No.; date; start time.
Bottom line: electrofusion voltage; cycle time (completed if fusion OK or remaining if it
shows an error); result (OK=correct; ERRn=incorrect > for the errors list, see CHAPTER
4: TROUBLESHOOTING).
Click <STOP> to exit this option.
C
EXPORT:
Validating the EXPORT option the fusion records can be transferred to a computer or to
a memory stick (depending on the model or user needs). The language of the fusion
records file will correspond to the one selected in the unit in the time of export.
>EXPORT
PRINT
PC-SERIAL OPTION:
The unit must have been previously connected to a computer using the null modem
transmission cable. No specific PC software is required. It is done using Windows Hyper
Terminal.
Connection configuration (for the first time):
1.
Open Windows Hyper Terminal (usually in Programs / Accessories / Communica-
tions).
2.
Accept any possible previous screens until you reach Connection Description:
3.
Connect to screen
30
- MODE OF USE
Click the
OK
Click the
ERR2
Click the START key to validate.
Click the
Name:
Icon:
OK
Connect using:
OK
key to see the previous fusion.
key to see the previous fusion.
key to pass to the following option.
e.g., BEAT
Choose one of the icons shown.
Select COM1 or COM2 as appropriate.
USER MANUAL
Range BEAT-Tr
Edition: January 2016
Revision: No. 3
Advertisement
Table of Contents
