Garland INT10G12 V2 Series User Manual

This document describes the front panel, LED indications, interfaces, rear panel, supported media types
and installation procedure for the INT10G12XXV2. The unit supports two taps in a single chassis. LFP
and Fail Mode (open) are supported on the network ports of both taps.
Front Panel
LED Indications
PS2
PS1
SYS
Port 1 L/A1
Port 2 L/A2
BP
Up Arrows SFP Ports 3-11
Down Arrows SFP Ports 2-12
Interfaces
Tap 1
Port 1 Network Port
Port 2 Network Port
Port 3 Monitor Port
Port 4 Monitor Port
Port 5 Monitor Port
Port 6 Monitor Port
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2022 Garland Technology, LLC. All rights reserved.
RegenTAP: Dual Breakout | INT10G12XXV2 | 4.22.1
Power Supply 2 LED
Power Supply 1 LED
System LED
Link/Activity LED
Link/Activity LED
N/A
Link/Activity LEDs
Link/Activity LEDs
Ingress Port 1
Ingress Port 1
Ingress Port 2
Ingress Port 2
User Guide
1