Advertisement
This document describes the front panel, LED indications, interfaces, rear panel, installation procedure
for the INT10G10SP1. The unit supports two span applications in a single chassis.
Front Panel
LED Indications
PS2
PS1
SYS
Up Arrows SFP Ports 1-9
Down Arrows SFP Ports 2-10
Interfaces
Port 1
Port 3
Port 5
Port 7
Port 9
Port 2
Port 4
Port 6
Port 8
Port 10
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2022 Garland Technology, LLC. All rights reserved.
RegenTAP: Dual Breakout | INT10G10SP1 | 4.22.1
Network Port
Ingress Span Port 3 / Port 5 / Port 7 / Port 9
Span Port
Ingress Port 1
Span Port
Ingress Port 1
Span Port
Ingress Port 1
Span Port
Ingress Port 1
Network Port
Ingress Span Port 4 / Port 6 / Port 8 / Port 10
Span Port
Ingress Port 2
Span Port
Ingress Port 2
Span Port
Ingress Port 2
Span Port
Ingress Port 2
User Guide
Power Supply 2 LED
Power Supply 1 LED
System LED
Link/Activity LEDs
Link/Activity LEDs
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Garland INT10G10SP1
Summary of Contents for Garland INT10G10SP1
- Page 1 User Guide RegenTAP: Dual Breakout | INT10G10SP1 | 4.22.1 This document describes the front panel, LED indications, interfaces, rear panel, installation procedure for the INT10G10SP1. The unit supports two span applications in a single chassis. Front Panel LED Indications Power Supply 2 LED...
- Page 2 8. Connect the span ports for span1 and/or span2 to the desired source. 9. Verify the link LEDs are illuminated indicating link. 10. Verify the activity LEDs are flashing indicating traffic. Garland Technology | 716.242.8500 | garlandtechnology.com/support Copyright © 2022 Garland Technology, LLC. All rights reserved.
Need help?
Do you have a question about the INT10G10SP1 and is the answer not in the manual?
Questions and answers