Garland P1GCSSP User Manual
  1. Manuals
  2. Brands
  3. Garland Manuals
  4. Network Hardware
  5. P1GCSSP
  6. User manual

Garland P1GCSSP User Manual

Data diode span tap
Hide thumbs
1
2
3

Advertisement

Table of Contents

The P1GCSSP is a portable 10M, 100M, 1G TAP designed for out-of-band monitoring and security
tools analysis. The P1GCSSP supports three (3) span mode options utilizing unidirectional solutions
to ensure that traffic cannot be injected back into the network port(s) from any span port.
This document describes the front panel, LED indications, interfaces, rear panel, rear switch settings,
port speed options and installation procedure for the P1GCSSP.

Front Panel

LED Indications

Port A LFP
Port A LNK
Port B LFP
Port B LNK

Interfaces

Span1 Mode
Port A
Port B
Port C
Port D
Span2 Mode
Port A
Port B
Port C
Port D
Span3 Mode
Port A
Port B
Port C
Port D
Garland Technology | 716.242.8500 |
Copyright © 2022 Garland Technology, LLC. All rights reserved.
Data Diode SPAN TAP
N/A
Link/Activity LED
N/A
Link/Activity LED
Network Port (ingress only)
Span Port
Span Port
Span Port
Network Port (ingress only)
Network Port (ingress only)
Span Port (aggregate A and B)
Span Port (aggregate A and B)
Network Port (ingress only)
Network Port (ingress only)
Network Port (ingress only)
Span Port (aggregate A, B and C)
www.garlandtechnology.com
User Guide
|
P1GCSSP
|
1.2.58
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P1GCSSP and is the answer not in the manual?

Questions and answers

Related Manuals for Garland P1GCSSP

Summary of Contents for Garland P1GCSSP

  • Page 1 P1GCSSP 1.2.58 The P1GCSSP is a portable 10M, 100M, 1G TAP designed for out-of-band monitoring and security tools analysis. The P1GCSSP supports three (3) span mode options utilizing unidirectional solutions to ensure that traffic cannot be injected back into the network port(s) from any span port.
  • Page 2 Port D Installation Procedure The P1GCSSP may be installed in any available 1U slot of a network rack and secured with rack mount screws or in the optional rack mount bracket, sold separately. The optional rack mount bracket is shown below.
  • Page 3 3. Insert 1G SFPs into ports 3 and 4. 4. Insert standard Ethernet cables into ports A and B. These ports are Auto MDIX. Connect the power supply to the P1GCSSP and plug it in to an available power source. Optional Rack Mount Bracket Garland Technology | 716.242.8500 |...

Table of Contents