Advertisement
This document describes the front panel, LED indications, interfaces, rear panel, rear switch and
Installation Procedure for the P1GCCAS and the P1GCSAS. This portable network TAP series is ideal for
10/100/1000MB copper network monitoring. The innovative design allows these TAPs to be easily
installed into any copper 10/100/1000MB network segment.
The P1GCSAS uses SFPs for the monitor ports which can be either copper or fiber SFPs. The Media
Types table shows the Garland Part Number for SFPs that are typically used in this application.
Front Panel
LED Indications
Port A LFP
Port A LNK
Port B LFP
Port B LNK
Port C BP
Port C LNK
Port D BP
Port D LNK
* In SYNC mode the LFP LEDs on both Network port A and B are green when there are no ethernet cables
connected.
* The P1GCSAS does not have LEDs for the Monitoring Ports C and D.
Rear Panel
Garland Technology | 716.242.8500 |
Copyright © 2022 Garland Technology, LLC. All rights reserved.
Green indicates LFP on Off indicates LFP off
Link/Activity LED
Green indicates LFP on Off indicates LFP off
Link/Activity LED
LED N/A
Link/Activity LED
LED N/A
Link/Activity LED
garlandtechnology.com/support
User Guide
AggreagtorTAP | P1GCxAS | 1.2.50
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Garland P1GCCAS
Summary of Contents for Garland P1GCCAS
- Page 1 This document describes the front panel, LED indications, interfaces, rear panel, rear switch and installation procedure for the P1GCCAS and the P1GCSAS. This portable network TAP series is ideal for 10/100/1000MB copper network monitoring. The innovative design allows these TAPs to be easily installed into any copper 10/100/1000MB network segment.
- Page 2 * The unit must be power cycled if the switch settings are modified. * The unit supports fail mode open on ports 1 and 2. Garland Technology | 716.242.8500 | garlandtechnology.com/support Copyright © 2022 Garland Technology, LLC. All rights reserved.
- Page 3 3. Utilizing the DIP switches (located on the reverse side of the unit, next to the power input) configure the P1GCCAS for the operating mode of your choice (see next page) Install network TAP into the live THIS STEP NEEDS TO BE DONE WITH NO POWER CONNECTED TO THE TAP network.
- Page 4 SFPTX SFPLX SFPSX For questions, please contact Garland Technology Support at: 8AM-9PM (CST) Monday - Friday (Except for observed US Holidays) Tel: 716.242.8500 Online: garlandtechnology.com/support Garland Technology | 716.242.8500 | garlandtechnology.com/support Copyright © 2022 Garland Technology, LLC. All rights reserved.
Need help?
Do you have a question about the P1GCCAS and is the answer not in the manual?
Questions and answers