S+S Regeltechnik RYMASKON 200-Modbus User Manual page 43

®
RYMASKON 200-Modbus
Modbus Slave User Manual
Register Name
set_point_min_0
set_point_min_1
set_point_min_2
set_point_min_3
set_point_min_4
set_point_min_5
set_point_min_6
set_point_min_7
set_point_min_8
set_point_min_9
set_point_min_10
set_point_min_11
set_point_min_12
set_point_min_13
set_point_min_14
set_point_min_15
Table 33: Set Point min. Values
© S+S REGELTECHNIK GMBH | THURN-UND-TAXIS-STR.22 | 90411 NÜRNBERG | GERMANY | FON +49(0)911 519470
Register
Address
15 14 13
448
0x01C0
449
0x01C1
450
0x01C2
451
0x01C3
452
0x01C4
453
0x01C5
454
0x01C6
455
0x01C7
456
0x01C8
457
0x01C9
458
0x01CA
459
0x01CB
460
0x01CC
461
0x01CD
462
0x01CE
463
0x01CF
These registers are used to allow set point changes for the end user or system administrator only within
limits defined with a set_point_max value of Table 32 and a set_point_min value of this Table.
All registers are 16 Bit signed values. Depending on the modbus_unit specified with the corresponding set
point configuration register at address 320 to 351 (Table 28 at Page 37) the value needs to be scaled as
described in Table 38 at Page 49 to achieve the desired result..
Bit Position
12 11 10 9 8
[0x0096]
[0x0000]
[0x0000]
[0x0000]
[0x0000]
[0x0000]
[0x0000]
[0x0000]
[0x0000]
[0x0000]
[0x0000]
[0x0000]
[0x0000]
[0x0000]
[0x0000]
[0x0000]
Page 43 of 55
7 6 5 4 3 2 1 0
|www.SplusS.de