Mercedes-Benz GLE Coupe 2023 Operator's Manual page 400

398 Technical data
GLE 450 4MATIC
Maximum vehicle height (AIR-
MATIC)
Wheelbase
Maximum ground clearance
(steel suspension)
Maximum ground clearance
(AIRMATIC)
Minimum ground clearance
(AIRMATIC)
Turning radius
Weights and loads
Please observe the following notes for the speci-
fied vehicle data:
Items of optional equipment increase the curb
R
weight and reduce the payload.
You will find vehicle-specific weight informa-
R
tion on the vehicle identification plate
( page 388).
69.5 in /
(1766 mm)
Roof load
115.5 in
Model
(2935 mm)
GLE 450 4MATIC
8.1 in
(205 mm)
Off-road driving
9.8 in
(250 mm) Fording depth
6.9 in
* NOTE Damage caused by water when
(175 mm)
fording
38.9 ft
Water can enter the engine compartment and
(11.87 m)
vehicle interior in the following cases:
The maximum permissible fording depth is
R
exceeded when traveling through standing
water.
A bow wave forms during fording.
R
Water accumulates when fording.
R
Do not exceed the maximum permissible
#
fording depth.
Drive slowly through water.
#
When driving through flowing water, be
#
aware that the permissible fording depth
Maximum roof load
is lower due to the accumulation of
165 lb (75 kg)
water.
The specified value indicates the maximum per-
missible fording depth for vehicles that are in
roadworthy condition and for slow driving through
standing water.
Observe the notes on off-road driving and fording
( page 159).
/