Mercedes-Benz GLE Coupe 2023 Operator's Manual page 170

168 Driving and parking
When the system switches to A: lowers
-
the vehicle to normal level
%
®
The ESP settings in the drive programs ;
and A are designed for stability. Therefore,
choose one of these drive programs espe-
cially when transporting roof loads, in trailer
operation and when the vehicle is fully loaded
or fully occupied.
Depending on the drive program, the following
systems will change their characteristics:
Drive
R
Engine and transmission management
-
Active Distance Assist DISTRONIC
-
Availability of Glide mode
-
®
ESP
R
Vehicles with AIRMATIC or E-ACTIVE BODY
R
CONTROL: suspension
Suspension and damping
-
Vehicle level (speed-dependent)
-
Steering
R
Notes on the roof load display
®
Certain drive programs and ESP settings are
unsuitable for transporting a roof load.
If one of these drive programs is set or selected,
the W symbol is shown as a warning. When
this symbol is shown, the selected drive program
is not suitable for transporting a load on the roof.
The following drive programs are affected:
Drive program C Sport
R
Drive program = Individual with the ESP
R
setting Sport
Selecting the drive program
®
Push DYNAMIC SELECT switch
#
backwards.
The drive program selected will appear on the
driver's display.
1 forwards or