Mercedes-Benz GLE Coupe 2023 Operator's Manual page 295

Select the USB device.
#
%
When USB devices contain multiple partitions,
recorded video files are not always displayed
in the recording list.
Mercedes-Benz recommends that you use
USB devices with one partition.
Starting or stopping video recording with the
dashcam
Requirements:
For recording and saving a video file: a USB
R
device is connected with the multimedia sys-
tem .
The ignition is switched on.
R
Multimedia system:
© Apps Dashcam
4 5 5
If several USB devices are connected with the
#
multimedia system, select a USB device
( page 292).
/
If no USB device is selected, a selection is
made automatically when recording starts.
To select a recording mode: select
#
Recording or Individual Recording.
Loop Recording records several short video
files. When the memory is full, recording is
continued automatically. In doing so, other
files will be overwritten starting with the oldest
file.
Individual Recording stops recording when
the memory limit is reached. An individual
recording is automatically protected against
being overwritten.
To start: select Start Recording.
#
The length of the recording is shown. The
not remove the storage medium during
recording. Before removing the storage
medium, eject it first. message appears. The
video file is stored on the USB device.
To end: select End Recording.
#
%
In some countries, geo-coordinates (longitude
and latitude) are shown in the video image.
For technical reasons, the geo-coordinates
may show greater inaccuracies.
MBUX multimedia system 293
Loop A report may appear in the following cases:
Individual Recording: the memory is full or
R
there are only a few minutes recording time
available. The video recording stops or will be
stopped imminently.
Change the USB device or delete a video file.
The camera is not functional, the
R
Unavailable
message appears.
Have the camera checked in an authorized
Mercedes-Benz Center.
If the country border indication has been
R
switched on .
Do
Camera