Mackie d8B V5.1 Owner's Manual page 184

D8B
Button
Number D8B Button Mapped HUI Button
Fader 17-24 Fader 1-8
Channel V-Pot
Channel V-Pot 1-8
17-24
Mute 17-24 Mute 1-8
Solo 17-24 Solo 1-8
Select 17-24 Select 1-8
Record Ready
Record Ready 1-8
17-24
Assign 17-24 VSel 1-8
Alt+Assign 17-
Insert 1-8
24
Write 17-24 Auto 1-8
1 Level to Tape Aux Mute
2 Digital Trim Shift (flip)
3 Aux 1 Send A
4 Aux 2 Send B
5 Aux 3 Send C
6 Aux 4 Send D
7 Aux 5 Send E
8 Aux 7 Rec Ready All
9 Aux 9-10 Bank Left
10 Aux 11-12 Bank Right
11 Aux 9-10 Pan Channel Left
12 Aux 11-12 Pan Channel Right
13 Pan Pan
14 Shift
Shift + Masters N/A
D8B VFD Display
D8B VFD V-Pots
Alt+Right D8B
Scroll
VFD V-Pot
D8B VFD Select
Buttons
Previous / Next N/A
15 On Assign
16 Setup Compare
17 Memory A Bypass
18 Memory B Insert
19 EQ Window Transport
20 Gate Window ALT
21 Compressor Window Edit
22 Plug-ins Window Status
23 Load Patch Window Mix
24 Save Patch Window Mem Loc
25 Assign Bus 2 Auto Enable Send
26 Assign Bus 3 Auto Enable Plug-in
Auto Enable Send
27 Assign Bus 4
Mute
28 Assign Bus 5 Auto Mode Read
29 Assign Bus 7 Auto Mode Latch
30 Assign Bus 8 Auto Mode Write
31 Assign L-R Shift/Add
Assign Route To
32 Save
Tape
Automation
33 Auto Mode Off
Bypass
Automation
34 Auto Enable Fader
Faders
D8B Manual • Appendices • page 178
D8B v5.1 B445 HUI Layer Control Mapping
For Logic 6
16220 Woodinville Redmond Rd. NE Woodinville, WA 98072
Tel: 800-258-6883 Fax: 425-806-6312 e-mail: techmail@mackie.com
Last Updated: 2/07/03
Global General HUI Layer
Mode Comments Logic 6 Function
N Move corresponding Logic channel Fader
N Move corresponding Logic channel Pan or Send Level
N
Mute corresponding Logic channel
N Solo corresponding Logic channel
N Select corresponding Logic channel
N
Record Arm corresponding Logic channel
Toggle Pre/Post of corresponding Logic channel Send for selected Send A-E. If Level To Tape (HUI Aux Mute) is lit,
N
then it will toggle the mute status of the corresponding Logic channel send for the selected Send A-E.
N Selects track for plug-in selection. If Bypass (#17) is on, then it toggles bypass of currently selected insert slot.
N Cycles automation. Use in conjunction with Auto Mode values to set automation mode for corresponding Logic track.
N
When lit, assign (V-Sel) toggles the mute status of the selected Send. When not lit, V-Sel will toggle the selected Send Pre/Post.
Puts HUI layer into shift Mode. Faders now adjust selected Aux Level, V-Pots adjust Aux Pan if available.
N
N Enables control of Logic Send 1 by HUI layer V-Pots
N Enables control of Logic Send 2 by HUI layer V-Pots
Enables control of Logic Send 3 by HUI layer V-Pots
N
N Enables control of Logic Send 4 by HUI layer V-Pots
N Enables control of Logic Send 5 by HUI layer V-Pots
Disables Record Ready on all tracks
N
N
Shifts HUI layer to left by 8 to view previous 8 faders
N
Shifts HUI layer to right by 8 to view next 8 faders
Shifts HUI layer to left by 1 to view previous fader
N
N
Shifts HUI layer to right by 1 to view next fader
N Enables control of Logic Pan on HUI layer V-Pots
N N/A
Go to HUI Layer on
Y Go to HUI layer on D8B
D8B
N Displays Plug-in/Insert settings for selected Insert Channel. There are two main views: Plug-in Edit View and Insert Assign view.
Changes the assigned Plug-in, chooses a Plug-in Preset, or adjusts a plug-in parameter listed in bottom line of VFD.
N
N Scroll to next/previous page of plug-in parameters in Plug-in Edit View. Scroll to inserts 1-4/5 in Insert Assign View.
Toggle Plug-in Parameter listed in top line of VFD in Plug-in Edit view
N
Change between normal HUI VFD mode and channel HUI VFD Mode. See note below.
N
N N/A
N
Toggles the VFD display between "track name/parameter name" and "parameter name/parameter value" modes
Toggles the Bypass button for Active Plug-in
N
N Toggles between Plug-in Edit view and Insert Assign View
N Opens/Closes Logic Transport Window
N Opens/Closes selected Logic Sample Editor Window
N
Shows Logic Arrange Window
N Opens/Closes Logic Audio Pool Window
N Shows Logic Track Mixer Window
N Opens/Closes Logic Marker List Window
Toggles automation playback and recording of send level
N
N Toggles automation playback and recording of plug-in parameters
N/A
N
Hold and press a channel Write (HUI Auto) button to put the Logic channel into Auto Read Mode
N
N Hold and press a channel Write (HUI Auto) button to put the Logic channel into Auto Latch Mode
N
Hold and press a channel Write (HUI Auto) button to put the Logic channel into Auto Write Mode
N Shifts to second function of some buttons. Used to select multiple values of some parameters.
N Saves the song
N Hold and press a channel Write (HUI Auto) button to turn off Logic automation on the channel
Toggles automation playback and recording of volume
N