Mackie d8B V5.1 Owner's Manual page 183

D8B
Button
Number D8B Button Mapped HUI Button
Automation
35 Auto Enable Mute
Mutes
Automation Auto
36 Auto Mode Touch
Touch
37 Automation Pan Auto Enable Pan
Automation Trim
38 Auto Mode Trim
Levels
39 Set Time Equals (=)
40 SMPTE View F8/Esc
41 D8B Keypad HUI/D8B key pad
42 Enter Enter
43 Loop Loop
44 Store In
Alt + Store Out
45 Locator Decimal (.)
Snapshot N/A
46 Rewind Rewind
Alt + Rewind RTZ
47 Fast Fwd Fast Forward
Alt + Fast Fwd End
48 Stop Stop
49 Play Play
50 Record Record
51 Jog & Shuttle Jog/Shuttle Select
52 Jog Wheel Jog Wheel
53 Cut/Zero Set Cut
54 Copy Copy
55 Paste Paste
56 Undo Undo
Other HUI Mode/HUI Layer Notes:
Global Mode: Global functions are always active when HUI Mode is on, no matter what D8B bank is active. Non-global functions are active only when HUI Mode is On and the D8B is displaying the HUI Layer.
Normal HUI VFD Mode: HUI Layer VFD displays the normal HUI VFD screen exactly as a real HUI would. The contents of the VFD depend on the DAW in use and other settings. See notes on the VFD above.
Channel HUI VFD Mode: HUI Layer VFD displays eight channel names in bottom line of VFD. First two VFD select buttons mirror the Channel L and Channel R functions. The name of the selected
channel/function is displayed in the center of the top VFD line. The Online status is also displayed at the end of this line.
D8B v5.1 B445 HUI Layer Control Mapping
For Soundscape
Global General HUI Layer
Mode Comments Soundscape Function
N/A
N
N N/A
N N/A
N N/A
Won't work with snap-
Press to set the current play locator, then type in the new time on the D8B numeric keypad and press Enter
Y
shot button pressed
to locate to the newly entered time.
Won't work with snap-
Y N/A
shot button pressed
The key pad works
Y/N
Corresponds to PC numeric keypad
with D8B with snap-
shot button pressed
The Enter key works
Y/N
N/A
with D8B with snap-
shot button pressed
Won't work with snap-
Y Toggle Loop button
shot button pressed
The Store key works
Y Toggle Auto Punch In button
with D8B with snap-
shot button pressed
Y Toggle Auto Punch Out button
Won't work with snap-
N/A
Y
shot button pressed
Toggles D8B snap- Press to enter D8B snapshot mode. Type a snapshot number and press Enter to recall a snapshot. Press Store,
Y
type a number, and press Enter to store a snapshot. Exit snapshot mode by pressing Snapshot or Enter.
shot recall mode.
Y Rewind
Go to L locator
Y Fast Forward
Go to R locator
Y
Stop. Press again to return to L Locator. Press again to return to beginning.
Y
Play. Also punches out of recording.
Y Start Recording. Press during playback to punch into record; press again to punch out.
Y
N/A
Y Jog
N N/A
N
N/A
N
N/A
N N/A
D8B Manual • Appendices • page 177