Mackie d8B V5.1 Owner's Manual page 181

D8B
Button
Number D8B Button Mapped HUI Button
Automation
35 Auto Enable Mute
Mutes
Automation Auto
36 Auto Mode Touch
Touch
37 Automation Pan Auto Enable Pan
Automation Trim
38 Auto Mode Trim
Levels
39 Set Time Equals (=)
40 SMPTE View F8/Esc
41 D8B Keypad HUI/D8B key pad
42 Enter Enter
43 Loop Loop
44 Store In
Alt + Store Out
45 Locator Decimal (.)
Snapshot N/A
46 Rewind Rewind
Alt + Rewind RTZ
47 Fast Fwd Fast Forward
Alt + Fast Fwd End
48 Stop Stop
49 Play Play
50 Record Record
51 Jog & Shuttle Jog/Shuttle Select
52 Jog Wheel Jog Wheel
53 Cut/Zero Set Cut
54 Copy Copy
55 Paste Paste
56 Undo Undo
Other HUI Mode/HUI Layer Notes:
Global Mode: Global functions are always active when HUI Mode is on, no matter what D8B bank is active. Non-global functions are active only when HUI Mode is On and the D8B is displaying the HUI Layer.
Normal HUI VFD Mode: HUI Layer VFD displays the normal HUI VFD screen exactly as a real HUI would. The contents of the VFD depend on the DAW in use and other settings. See notes on the VFD above.
Channel HUI VFD Mode: HUI Layer VFD displays eight channel names in bottom line of VFD. First two VFD select buttons mirror the Channel L and Channel R functions. The name of the selected
channel/function is displayed in the center of the top VFD line. The Online status is also displayed at the end of this line.
D8B v5.1 B445 HUI Layer Control Mapping
For DP3.1
Global General HUI Layer
Mode Comments DP3.1 Function
Toggles Audio Track Mute and MIDI Track Mute Automation Enables in DP3 Automation Setup window
N
Hold and Press a channel Write (HUI Auto) button to enable automation playback and recording on the corresponding
N
DP3 channel, and to put the channel into Touch automation mode.
N Toggles Audio Pan and MIDI Pan Automation Enable in DP3 Automation Setup window.
Hold and Press a channel Write (HUI Auto) button to enable automation playback and recording on the corresponding
N
DP3 channel, and to put the channel into Trim Latch automation mode.
Won't work with snap-
Y
Toggle Memory Cycle Button
shot button pressed
Won't work with snap-
Cancel open dialog windows
Y
shot button pressed
The key pad works
Y/N Corresponds to Mac number pad. See DP3 commands window for command mapping.
with D8B with snap-
shot button pressed
The Enter key works
Y/N OK any on-screen dialogs. Play.
with D8B with snap-
shot button pressed
Won't work with snap-
Y Toggle Memory Cycle Button
shot button pressed
The Store key works
Y Set the Punch-In point to the current cursor position. Can be used during playback.
with D8B with snap-
shot button pressed
Y Set the Punch-Out point to the current cursor position. Can be used during playback.
Won't work with snap-
Highlight DP3 current locator position. Use D8B keypad to enter in numbers. Press enter to confirm and go to the new locate point.
Y
shot button pressed
Toggles D8B snap- Press to enter D8B snapshot mode. Type a snapshot number and press Enter to recall a snapshot.
Y
shot recall mode. Press Store, type a number, and press Enter to store a snapshot. Exit snapshot mode by pressing Snapshot or Enter.
Rewind DP3 transport
Y
Return DP3 locator to beginning memory locate point. Press again to return to beginning of timeline.
Y Fast Forward DP3
Advance DP3 Transport to end of session
Y Stop DP3 playback
Y Start DP3 playback
Y Start Recording in DP3. Press during playback to punch into record; press again to punch out.
Y Press once to go into jog, press again to go into shuttle, and press again to go back to normal.
Turn wheel to either Jog or Shuttle. If you are pop editing a soundbite and you enter jog, audio will be heard while you scrub
Y
the soundbite. If you are editing a soundbite in the Soundbite Edit window, you can also scrub the audio.
N Cut selection/sound bite
N
Copyp selection/sound bite
N Paste contents of clipboard
N
Press to undo previous command. Press again to redo the command (no access to multiple undos).
D8B Manual • Appendices • page 175