XTline XT102800 Original Instruction Manual page 57

6. FUNCTIONAL DESCRIPTION
ACTION MODE ADJUSTMENT
The action mode selector (4) is used to switch between SCREWING, DRILLING and HAMMER
DRILLING. The arrow at the top of the device indicates which of the three given operating modes
is currently set.
TORQUE SELECTOR ADJUSTMENT
The torque selector (3) is used to set the torque value when tightening and loosening the screws
or bolts. Possibility to set the values within the positions 1–21.
SPEED ADJUSTMENT
The speed selector (5) can be used to adjust the speed setting by selecting between two values.
The visible value applies to the current set.
DIRECTION OF ROTATION SELECTOR
The direction of rotation selector (7) is used to adjust the direction of rotation of the chuck to the
left or right as well as to lock the main trigger.
LED WORK LIGHT
The LED work light (10) is located at the bottom of the device directly under the handle and serves
for better lighting of the work area.
TRIGGER
The main trigger (11) is the basic control element of the device and regulates the speed.
CHUCK
The chuck (2) and its inner jaws (1) are used for clamping work tools and accessories.
HANDLE
The ergonomic, rubberized handle (8) serves for a firm grip of the device.
4
3
2
1
11
10
5
6
7
8
9