Dynabrade 66402 Instruction Manual
  1. Manuals
  2. Brands
  3. Dynabrade Manuals
  4. Grinder
  5. 66402
  6. Instruction manual

Dynabrade 66402 Instruction Manual

Tool post grinder-machine
Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

For Serial No.9I1001 and Higher
Tracking Knob
9.31
(236.5)
(12.7)
Mounting Pad
DYNABRADE
Always operate, inspect and maintain this tool in accordance with the Safety Code for portable air tools
(ANSI B186.1) and any other applicable safety codes and regulations. Please refer to Dynabrade's
Warning/Safety Operating Instructions for more complete safety information.
.50
1.63
(41.4)
9.32
(236.7)
66402 Tool Post Grinder
Instruction Manual
Air Powered Abrasive Belt Machine
.46
(11.7)
7.65
(194.3)
3.25
(82.5)
Parts Page Reorder No. PD00•50R
Supercedes PD00•50
13.58
(344.9)
13.14
(333.8)
Belt Tension
Reg. & Valve
Motor Control
11.00
(279.4)
September 2014
.50
(12.7)
3.00
(76.2)
4.31
(109.5)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 66402 and is the answer not in the manual?

Questions and answers

Related Manuals for Dynabrade 66402

Summary of Contents for Dynabrade 66402

  • Page 1 Air Powered Abrasive Belt Machine Always operate, inspect and maintain this tool in accordance with the Safety Code for portable air tools (ANSI B186.1) and any other applicable safety codes and regulations. Please refer to Dynabrade’s Warning/Safety Operating Instructions for more complete safety information.
  • Page 3 66440 Air Motor Oil: O = Air Lube Grease: G = Lubriplate 630 AA Adhesive: A = Loctite #271 9.0 N•m = Loctite #567 Torque: N•m x 8.85 = In. - lbs. Index Key No. Part # Description 1 52164 Exhaust Cover 2 52166 Seal...

  • Page 4: Belt Tracking Adjustment

    66440 Air Motor Disassembly/Assembly Instructions (continued) 3. Install rotor nut (with wrench flats towards rotor) onto rotor shaft (torque 250 In-lbs.). 4. Check clearance between rotor and bearing plate. Clearance should not exceed .002". 5. Press 01036 Bearing into 52476 Bearing Plate. 6.

  • Page 5: Maintenance Instructions

    2. Some silencers on air tools may clog with use. Clean and replace as required. 3. All Dynabrade Rotary Vane air motors should be lubricated with two drops of Dynabrade Air Lube (P/N 95842: 1pt. 473ml.) every four hours of use.
  • Page 6 Visit our Web Site: www.dynabrade.com Email: Customer.Service@Dynabrade.com DYNABRADE, INC., 8989 Sheridan Drive • Clarence, NY 14031-1490 • Phone: (716) 631-0100 • Fax: 716-631-2073 • International Fax: 716-631-2524 DYNABRADE EUROPE S.àr.l., Zone Artisanale • L-5485 Wormeldange—Haut, Luxembourg • Telephone: 352 76 84 94 1 • Fax: 352 76 84 95 1 ©...

Table of Contents